Check out what's new in the latest edgeboot portal release:

feature Device Groups make it easier than ever to manage devices with similar configurations. Initial features include scheduling tasks at the group level and updating connected device info. The next release includes managing firmware, adjusting Ethernet interface settings, and applying Profiles. Get started today by adding devices to groups and easily manage large quantities of devices in the future!

feature Configure independent AI actions when monitoring dual WAN connections, specific to the Ethernet interface experiencing issues:

feature User-defined probe targets allow for customized Advanced Monitoring telemetry data to be captured and rendered in-app:

feature edgeboot is now certified for Granite's Multicarrier SIM. Devices with this SIM can connect to any major LTE provider network depending on best signal strength availability.

feature View, refresh, and clear ARP entries within Interface settings for devices with firmware 0.3.7-braavos or 1.0.7-edge-pro or later:

feature CSQ values are reported in addition to RSSI - simply toggle between RSSI & CSQ values under My Devices.

improvement Device events consolidation & improved formatting. Quicky understand when AI actions resolve or do not resolve connectivity.

improvement Custom sorting options for Scheduled Tasks and improved handling for offline devices.

improvement Easily identify AC port connection status via the built-in indicator:

feature Custom failover settings for edgebootPro - if there is already a failover device upstream, the auto-failover setting in the edgebootPro can be disabled to avoid failover conflicts.

feature Console session enhancements: a larger playground to work in and general font, cursor, and spacing enhancements.

Granite edgeboot device firmware 0.4.0-braavos

Release Notes:

• Allow user-defined probe targets for customized Advanced Monitoring telemetry
• Add graceful reboot option to serial console menu to perform remote system reboot without affecting devices plugged into edgeboot - simply press 0 to initiate a system reboot from the main console menu:

• AI mode logic enhancements for independent actions based on specific ethernet interfaces (ideal for monitoring two wired WAN connections)
• Enable USB-Serial driver for CH340/341 chipsets to support more USB serial devices
• Improve modem info collection by switching from AT to native commands
• Improve device logging and tune non-critical error messages
• Add safeguards to AI reboot service to prevent excessive reboots
• Implement additional performance monitoring for CPU and memory usage
• Adjust modem watchdog timers to allow for clean initialization across various LTE providers
  

We recommend updating your devices to 0.4.0-braavos for optimal performance and improved reliability. For eligible devices, a banner will appear as shown below. Click "Apply latest firmware" and you’re all set:

For best possible performance, security, and feature compatibility, we are sunsetting support for older firmware versions on edgeboot and edgebootPro devices.

End of Support Effective: July 31, 2025

The following firmware cutoffs will apply:

• edgeboot:
  ❌ All versions older than 0.4.0-braavos will no longer be supported.
• edgebootPro:
  ❌ All versions older than 1.1.0-edge-pro will no longer be supported.

Apply updates in-app or contact your account rep for bulk update options.

Granite edgebootPro device firmware 1.1.0-edge-pro

Release Notes:

• Allow user-defined probe targets for customized Advanced Monitoring telemetry
• Add graceful reboot option to serial console menu to perform remote system reboot without affecting devices plugged into edgebootPro - simply press 0 to initiate a system reboot from the main console menu:
• 
  AI mode logic enhancements for independent actions based on specific ethernet interfaces (ideal for monitoring two wired WAN connections)
• Add ability to clear/renew DHCP leases for LAN interfaces
• Fully automated SIM provisioning and modem initialization across all supported carriers
• Fix LTE signal reporting issue where local LTE is up but portal is displaying down or searching
• Add LTE Survey Tool to scan and report live modem signal quality
• Add additional Kernel USB-serial drivers to support more peripherals
• Enable USB-Serial driver for CH340/341 chipsets to support more USB serial devices
• Add packet sniffer detection to improve security visibility
• Adjust dispatcher rules to prevent LTE egress over inactive interface(s)
• Improve modem info collection by switching from AT to native commands
• Improve interface manager handling to prevent unnecessary flapping between wired and LTE interfaces
• Adjust modem watchdog timers to allow for clean initialization across various LTE providers
• Harden auto-failover logic to expand quantity of ping targets & failure thresholds prior to failing over
• Adjust gateway config from ETH1 in NATLAN mode to prevent routing loops and DNS failures
• Prevent routing to backup interface when failover is disabled in NATLAN mode
• Improve device logging and tune non-critical error messages
• Add safeguards to AI reboot service to prevent excessive reboots
• Implement additional performance monitoring for CPU and memory usage

We recommend updating your devices to 1.1.0–edge-pro for optimal performance and improved reliability.

For eligible devices, a banner will appear as shown below. Click "Apply latest firmware" and you’re all set:

Granite edgebootPro device firmware 1.0.7-edge-pro

Release Notes:

• View, refresh, and clear ARP entries for devices connected to edgebootPro ethernet interfaces
• Watchdog gracefully restarts the edgebootPro OS without impact to devices connected to edgebootPro
• Interface binding enhancement to intelligently detect best path [ETH0, ETH1, LTE] & bind to it for improved outbound console reliability and device reachability
• Improve DNS query logging to reduce memory utilization
• Add system utility to automatically free up memory if high usage is detected
• Improve persistent logging with automatic log rotation and multiple backups for redundancy
• Improve LTE watcher performance via change in how historical LTE signal strength is stored and shown
• Extend LTE health check tolerance for failed pings to reflect standard network fluctuations on LTE
• Improve network route management: adjust network route priorities proactively versus event driven

We recommend updating your devices to 1.0.7-edge-pro for best performance.

For eligible devices, a banner will appear as below. Click the "Apply latest firmware" button and you're all set:

Granite edgeboot device firmware 0.3.7-braavos

Release Notes:

• View, refresh, and clear ARP entries for devices connected to edgeboot ethernet interfaces
• Watchdog gracefully restarts the edgeboot OS without impact to devices connected to edgeboot
• Interface binding enhancement to intelligently detect best path [ETH0, ETH1, LTE] & bind to it for improved outbound console reliability and device reachability
• Improve DNS query logging to reduce memory utilization
• Add system utility to automatically free up memory if high usage is detected
• Improve persistent logging with automatic log rotation and multiple backups for redundancy
• Improve LTE watcher performance via change in how historical LTE signal strength is stored and shown
• Extend LTE health check tolerance for failed pings to reflect standard network fluctuations on LTE
• Improve network route management: adjust network route priorities proactively, versus event driven

We recommend updating your devices to 0.3.7-braavos for best performance.

For eligible devices, a banner will appear as below. Click the "Apply latest firmware" button and you're all set:

Check out what's new in the latest edgeboot release:

feature Enhanced LTE performance history available via RSSI graph within My Devices on firmware versions 1.0.6-edge-pro (edgebootPro) and 0.3.6-braavos (edgeboot). CSQ coming soon! 

feature edgeboot & edgebootPro LTE status indicators added to the My Devices index for view & export. Easily identify locations where LTE signal could use a boost!

feature edgebootPro Primary interface setting moved to My Devices header. Easily compare interface settings against active interface to determine locations that may be failed over. The selected option will be highlighted turquoise. To edit this setting, simply click the desired Primary interface and confirm changes. 

feature edgeboot & edgebootPro MAC addresses are available as a custom column in the My Devices index for MAC binding or other MAC related networking tasks.

improvement edgeboot & edgebootPro ethernet interfaces relabeled [ETH0] and [ETH1] to clearly differentiate network ports from AC power ports.

Check out what's new in the latest edgeboot release:

feature edgebootPro [ETH0] and [ETH1] interfaces can both be configured as WAN on device firmware versions 1.0.3-edge-pro and above. 

feature edgebootPro users can now see the active interface [LTE, ETH] from the My Devices table without needing to click into the device details. LTE signal strength coming soon!

feature In-app device firmware updates now available for edgebootPro! For eligible devices, a firmware upgrade banner will appear under the device detail. With the click of a button, an update will initiate after a device health check.

feature Custom filters & table headers - personalizing the edgeboot experience to best meet your needs! Customize table headers, drag to re-order, and apply filters to ensure you're seeing the data that's meaningful to you. Easily revert settings to default as needed.

featureDevice configuration action log - easily view which user(s) made ethernet configuration changes, adjusted Profile settings, and more! Navigate to the "Events" tab and view changes under Admin events.

feature edgeboot assistant is live! Great for clients handling their own warehousing, this tool enables users to allocate edgeboot devices to locations on-demand. The days of sifting through inventory to find a specific device for a specific site are over! Contact your G360 account rep to learn more. 

improvement Enhanced IP address & subnet validations to aid users when configuring ethernet interface settings.

improvement Whether your primary connection is [ETH0] or [ETH1], telemetry data loads with the defaulted interface auto-selected. If both interfaces are in use, users can still toggle between [ETH0] and [ETH1] to view independently. 

improvement edgeboot Profiles can no longer be set to [OFF] mode if previously set to [ON] or [AI]. If users wish to turn AC power OFF across the board, contact your G360 account rep to make this change.

 improvement edgeboot resources are back! edgeboot users can reference install guides and best practices from the portal. 

Exciting Update: Enhanced My Devices Page in edgeboot.io

We’re thrilled to announce a major update to the My Devices page in edgeboot.io. This new release brings a host of powerful features designed to make managing your devices easier and more intuitive than ever.

What’s New:

• Sophisticated Hardware Renderings: Visualize your hardware like never before. The updated My Devices page now includes detailed renderings of your devices, helping you quickly understand port assignments and configurations across your locations.
• Advanced Monitoring Graphs: Gain deeper insights into device performance with advanced monitoring tools. The new graphs display packet loss, jitter, and latency thresholds from each Ethernet interface, showing the past 12 hours of data to help you identify and troubleshoot network issues with precision.

This update is designed to give you clearer visibility into your devices' configurations and network health, so you can manage your edgeboot infrastructure more effectively.

Check out the enhanced My Devices page today and experience the difference!

We are thrilled to launch regular edgeboot product updates using this update feed 🎉

We'll let you know what's new and be sure to check out what's next on our roadmap. 

Have an idea? 🗣 Let us know your thoughts! 

We look forward to hearing your feedback.