Granite edgebootPro device firmware 1.1.3-edge-pro

Release Notes:

• Fixed an issue where bootloader messages from the outbound console port could interfere with connected network devices during boot
  • Important: The device will reboot twice during the upgrade process (up to 15 minutes). Do not disconnect power during this time, as interruption may permanently damage the device.

We recommend updating your devices to 1.1.3–edge-pro for optimal performance and improved reliability.

For eligible devices, a banner will appear as shown below. Click "Apply latest firmware" and you’re all set:

Granite edgebootPro device firmware 1.1.2-edge-pro

Release Notes:

• Improved failover reliability by resolving occasional routing failures when switching between WAN connections.

We recommend updating your devices to 1.1.2–edge-pro for optimal performance and improved reliability.

For eligible devices, a banner will appear as shown below. Click "Apply latest firmware" and you’re all set:

Granite edgeboot device firmware 0.4.2-braavos

Release Notes:

fix Custom probe target value mismatches result in device status sync issues. This patch resolves value conflicts.

Granite edgeboot device firmware 0.4.1-braavos

Release Notes:

fix Rollback AI reboot service safeguards. Logic undergoing improvement prior to re-release.

Check out what's new in the latest edgeboot portal release:

feature Device Groups make it easier than ever to manage devices with similar configurations. Initial features include scheduling tasks at the group level and updating connected device info. The next release includes managing firmware, adjusting Ethernet interface settings, and applying Profiles. Get started today by adding devices to groups and easily manage large quantities of devices in the future!

feature Configure independent AI actions when monitoring dual WAN connections, specific to the Ethernet interface experiencing issues:

feature User-defined probe targets allow for customized Advanced Monitoring telemetry data to be captured and rendered in-app:

feature edgeboot is now certified for Granite's Multicarrier SIM. Devices with this SIM can connect to any major LTE provider network depending on best signal strength availability.

feature View, refresh, and clear ARP entries within Interface settings for devices with firmware 0.3.7-braavos or 1.0.7-edge-pro or later:

feature CSQ values are reported in addition to RSSI - simply toggle between RSSI & CSQ values under My Devices.

improvement Device events consolidation & improved formatting. Quicky understand when AI actions resolve or do not resolve connectivity.

improvement Custom sorting options for Scheduled Tasks and improved handling for offline devices.

improvement Easily identify AC port connection status via the built-in indicator:

feature Custom failover settings for edgebootPro - if there is already a failover device upstream, the auto-failover setting in the edgebootPro can be disabled to avoid failover conflicts.

feature Console session enhancements: a larger playground to work in and general font, cursor, and spacing enhancements.

Granite edgeboot device firmware 0.4.0-braavos

Release Notes:

• Allow user-defined probe targets for customized Advanced Monitoring telemetry
• Add graceful reboot option to serial console menu to perform remote system reboot without affecting devices plugged into edgeboot - simply press 0 to initiate a system reboot from the main console menu:

• AI mode logic enhancements for independent actions based on specific ethernet interfaces (ideal for monitoring two wired WAN connections)
• Enable USB-Serial driver for CH340/341 chipsets to support more USB serial devices
• Improve modem info collection by switching from AT to native commands
• Improve device logging and tune non-critical error messages
• Add safeguards to AI reboot service to prevent excessive reboots
• Implement additional performance monitoring for CPU and memory usage
• Adjust modem watchdog timers to allow for clean initialization across various LTE providers
  

We recommend updating your devices to 0.4.0-braavos for optimal performance and improved reliability. For eligible devices, a banner will appear as shown below. Click "Apply latest firmware" and you’re all set:

For best possible performance, security, and feature compatibility, we are sunsetting support for older firmware versions on edgeboot and edgebootPro devices.

End of Support Effective: July 31, 2025

The following firmware cutoffs will apply:

• edgeboot:
  ❌ All versions older than 0.4.0-braavos will no longer be supported.
• edgebootPro:
  ❌ All versions older than 1.1.0-edge-pro will no longer be supported.

Apply updates in-app or contact your account rep for bulk update options.

Granite edgebootPro device firmware 1.1.0-edge-pro

Release Notes:

• Allow user-defined probe targets for customized Advanced Monitoring telemetry
• Add graceful reboot option to serial console menu to perform remote system reboot without affecting devices plugged into edgebootPro - simply press 0 to initiate a system reboot from the main console menu:
• 
  AI mode logic enhancements for independent actions based on specific ethernet interfaces (ideal for monitoring two wired WAN connections)
• Add ability to clear/renew DHCP leases for LAN interfaces
• Fully automated SIM provisioning and modem initialization across all supported carriers
• Fix LTE signal reporting issue where local LTE is up but portal is displaying down or searching
• Add LTE Survey Tool to scan and report live modem signal quality
• Add additional Kernel USB-serial drivers to support more peripherals
• Enable USB-Serial driver for CH340/341 chipsets to support more USB serial devices
• Add packet sniffer detection to improve security visibility
• Adjust dispatcher rules to prevent LTE egress over inactive interface(s)
• Improve modem info collection by switching from AT to native commands
• Improve interface manager handling to prevent unnecessary flapping between wired and LTE interfaces
• Adjust modem watchdog timers to allow for clean initialization across various LTE providers
• Harden auto-failover logic to expand quantity of ping targets & failure thresholds prior to failing over
• Adjust gateway config from ETH1 in NATLAN mode to prevent routing loops and DNS failures
• Prevent routing to backup interface when failover is disabled in NATLAN mode
• Improve device logging and tune non-critical error messages
• Add safeguards to AI reboot service to prevent excessive reboots
• Implement additional performance monitoring for CPU and memory usage

We recommend updating your devices to 1.1.0–edge-pro for optimal performance and improved reliability.

For eligible devices, a banner will appear as shown below. Click "Apply latest firmware" and you’re all set:

Granite edgebootPro device firmware 1.0.7-edge-pro

Release Notes:

• View, refresh, and clear ARP entries for devices connected to edgebootPro ethernet interfaces
• Watchdog gracefully restarts the edgebootPro OS without impact to devices connected to edgebootPro
• Interface binding enhancement to intelligently detect best path [ETH0, ETH1, LTE] & bind to it for improved outbound console reliability and device reachability
• Improve DNS query logging to reduce memory utilization
• Add system utility to automatically free up memory if high usage is detected
• Improve persistent logging with automatic log rotation and multiple backups for redundancy
• Improve LTE watcher performance via change in how historical LTE signal strength is stored and shown
• Extend LTE health check tolerance for failed pings to reflect standard network fluctuations on LTE
• Improve network route management: adjust network route priorities proactively versus event driven

We recommend updating your devices to 1.0.7-edge-pro for best performance.

For eligible devices, a banner will appear as below. Click the "Apply latest firmware" button and you're all set:

Granite edgeboot device firmware 0.3.7-braavos

Release Notes:

• View, refresh, and clear ARP entries for devices connected to edgeboot ethernet interfaces
• Watchdog gracefully restarts the edgeboot OS without impact to devices connected to edgeboot
• Interface binding enhancement to intelligently detect best path [ETH0, ETH1, LTE] & bind to it for improved outbound console reliability and device reachability
• Improve DNS query logging to reduce memory utilization
• Add system utility to automatically free up memory if high usage is detected
• Improve persistent logging with automatic log rotation and multiple backups for redundancy
• Improve LTE watcher performance via change in how historical LTE signal strength is stored and shown
• Extend LTE health check tolerance for failed pings to reflect standard network fluctuations on LTE
• Improve network route management: adjust network route priorities proactively, versus event driven

We recommend updating your devices to 0.3.7-braavos for best performance.

For eligible devices, a banner will appear as below. Click the "Apply latest firmware" button and you're all set: